Operation, Gtaw (tig) welding, 220 off 3 – Lincoln Electric IM956 POWER WAVE C300 User Manual
Page 37: B-16
Advertising
B-16
OPERATION
B-16
POWER WAVE
®
C300
GTAW (TIG) WELDING
The Power Wave
®
C300 is excellent for Touch Start
TIG welding.
START OPTIONS
END OPTIONS
SETUP
IR PORT
WELD MODE
UltimArc™ Control
OUTPUT
ON
OUTPUT
OFF
+
+
AMPS
WFS
VOLTS
TRIM
220
OFF
3
TOUCH START TIG
No
UltimArc™ Control
are
active for Touch Start TIG.
MODE
TOUCH START 3
WELD MODE
UltimArc™ Control
Maximum
Amperage
No Arc starting Options are
active for Touch Start TIG
START OPTIONS
EFFECT
DESCRIPTION
END OPTIONS
0 To 10 seconds
Function
Crater Time
During the Crater time, the
machine will ramp up or down
from the Weld Procedure to
the Crater Procedure.
BASIC OPERATION
CONTROL OPTIONS
Advertising