LumaSense Technologies ISR 6 Advanced - Manual (Page 12)

ISR 6 Advanced Manual Introduction · 12
2.6 Accessories (optional)
Numerous accessories guarantee easy installation of the pyrometer. The following overview
shows a selection of suitable accessories. You can find the entire accessory program with all
reference numbers in Chapter
8 , Reference numbers.
2.6.1 Mounting
An adjustable mounting angle is available to easily mount the
pyrometer and align it to the measured object.
2.6.2 Cooling Jacket
The completely covered water cooling jacket is made from stainless
steel and serves to protect the pyrometer if exposed to a hot
environment. It is designed for ambient temperatures up to 180 °C.
2.6.3 Air Purge
The air purge protects the lens from contamination of dust and
moisture. It has to be supplied with dry and oil-free pressurized air and
generates an air stream shaped like a cone.
2.6.4 Vacuum support
The pyrometer can be easily fixed on a vacuum chamber with the KF 16
vacuum support with sighting window.
2.6.5 Scanning Mirror
The scanning mirror unit SCA 5 allows the measured object to be
scanned over a certain range. The measuring beam of the pyrometer
moves straight in one line across the object and collects temperature
data of this line. This is useful when used in combination with the
maximum value storage (peak picker) to measure objects which move
out of the target area. The scanning angle of the mirror is 0 to 12° and
the scanning frequency 0 to 5 Hz. Both values are easily adjustable at
the scanner.
2.6.6 Flange System
The flange system is a modular mounting system to fix the pyrometer on furnaces, vacuum
chambers, etc.
Water cooling jacket with
integrated air purge
Mounting Angle
Air Purge
Vacuum
Support
Scanning Mirror