Triton RL5000 X2 Series User Manual - Manual (Page 22)

1 8
M
ODEL
RL5000 (X2) U
SER
M
ANUAL
C
ASSETTE
C
LOSE
P
ROCEDURES
Follow Access instructions to enter M ANAGEMENT F UNCTIONS . Select T ERMINAL C LOSE F UNCTIONS . Select
C ASSETTE C LOSE .
Select cassette(s) to Close. A check mark (
√
)
identifies which cassette(s) are selected. Press
<E
NTER
>.
After cassette(s) have been reinserted in the
dispenser, press <E NTER >.
Note: For an NMD-50/100 dispenser installed, wait
for the cassettes to LOCK (this is done automatically).
Press <Enter> if applicable.
A Close report is displayed to be printed or
saved. This operation will reset the number of bills
in the cassette(s) to ZERO (0). Press <E
NTER >.
Remove and Replenish the selected cassette(s).
Procedures for cassette replenishment are
on the following pages.
Note: If an NMD-50 dispenser is installed, wait for the
cassettes to UNLOCK (this is done automatically).
P lace selected cassette(s) IN SERVICE. Press
<E NTER >. Note: The NMD-50/100 cassettes Must be
Locked and In Service for normal operation.
Enter Cassette Quantity (number of notes, NOT
value) for the selected cassette(s). Press <E NTER >
to accept entry. Repeat for each selected cassette.
A Trial Cassette Close report automatically is
displayed to be printed or saved. Print and retain a
copy for starting point reference. Press <E
NTER > to
return to Close functions.