Triton RL5000 X2 Series User Manual - Manual (Page 34)

30
M
ODEL
RL5000 (X2) S
ERIES
U
SER
M
ANUAL
This section of the manual covers preventive and corrective maintenance procedures appropriate for user
personnel. The following areas are covered:
I NTRODUCTION
1. R EPLENISHING R ECEIPT P APER . Describes how to replace a
spent receipt paper roll.
2. C
LEANING THE
E
NCLOSURE
. The proper way to clean the ATM
housing.
3. C
ARD
R
EADER
C
LEANING
. The recommended card reader
cleaning technique.
*Important*
Only qualified service personnel
are authorized to repair or ser-
vice the terminal. Should a mal-
function occur, DO NOT attempt
to service the unit yourself! Con-
tact your Triton certified service
provider!
NOTE: This operation must be completed with the AC power
applied to the ATM.
1. Open the control panel by unlocking the top enclosure
and pulling the hinged door forward.
2. If paper remains on the roll, cut or tear the paper between
the roll and the printer.
3. Remove the existing paper and spindle from the paper
bracket.
R EPLENISHING THE R ECEIPT P APER
Cut paper between roll and paper path Paper roll/spindle removed.