Triton RL5000 X2 Series User Manual User Manual
Page 27
2 3
C
ASSETTE
C
LOSE
/ C
ASH
R
EPLENISHMENT
R
EMOVING
THE
R
EJECT
V
AULT
There are two (2) types of Reject vaults: lockable (standard) and open (optional). These procedures refer-
ence the standard lockable type.
The reject vault is locked when it is removed from the dispensing mechanism. The color indicator shows a
green window when the reject vault is opened for note collection (inside the dispensing mechanism) and
when it is ready for use.
Lockable reject vault.
Open (non-lockable) reject vault.
1.
To remove the reject vault, grasp the vault handle with one hand while holding the mechanism in place
with the other hand. Pull the vault out slightly. Place one hand underneath to support the vault as you
slide it completely out of the unit. Place it on a level surface.
The color indicator shows a red window when the reject
vault is inserted into the dispensing mechanism and until
it is opened for rejected note retrieval.
IMPORTANT!
If you remove the reject vault with power applied, the terminal will sense this and automatically
reset the rejected note count to ZERO. Therefore, to ensure an accurate rejected note count
NEVER REMOVE THE REJECT VAULT WITH POWER APPLIED WITHOUT CHECKING FOR
AND REMOVING ANY REJECTED NOTES.
Indicator