Triton RL5000 X2 Series User Manual - Manual (Page 25)

2 1
C ASSETTE C LOSE / C ASH R EPLENISHMENT
R
EPLENISH
C
ASSETTE
(NMD-50)
R
EMOVING
N
OTE
C
ASSETTES
1. UNLOCK the cassettes, using the Cassette Close procedures. Open the vault door to gain access to
the dispensing mechanism.
2. To remove the selected note cassette, grasp the cassette handle with one hand while holding mecha-
nism in place with the other hand. Pull the cassette out slightly. Place one hand underneath to support
the cassette as you slide it completely out of the unit.
Continue to support the bottom of the cassette to keep
it level as you place it on a table or other flat surface.
Removing note cassette.
O
PENING
N
OTE
C
ASSETTES
1. Open the cassette by simultaneously pressing the release button and lifting the lid. Flip the lid back
fully, allowing it to rest on the table or other flat surface.
2. Move the pusher plate to the rear of the cassette (toward the handle). Ensure the pusher plate is fully
back. It should stay in this position.
Press release button and lift top. Pull packer plate back.