Triton 97XX Series Operation Manual - Manual (Page 124)

TRITON SYSTEMS, INC. 5-69
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
TERMINAL OWNER
F ACTORY D EFAULT : NONE
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select CHANGE MESSAGES.
3. Select TERMINAL OWNER.
D ESCRIPTION :
The name of the TERMINAL OWNER is stored in the terminal and
displayed to the customer in the surcharge warning message. The
name is entered directly into the terminal.
To enter a digit 0-9, simply press the key that has that digit. To
enter a letter, first press the <CTRL> key, then press the key that
has the letter you want on it. The first press of the key will display
the first character above the number. Subsequent presses will
display the characters in sequence. When the character you want
is displayed, press the <RIGHT ARROW> key to ‘lock in’ the letter.
If your next character is a letter, you must press the <CTRL> key
again.
The name can be up to 18 characters long.
E RROR C ONDITIONS :
There are no error conditions directly associated with this function.