Triton 97XX Series Operation Manual - Manual (Page 136)

TRITON SYSTEMS, INC. 5-81
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES
9710-S ERIES 9750-S ERIES
RELEARN BILL THICKNESS
F ACTORY D EFAULT : N/A
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select CASSETTE SETUP.
4. Choose the RELEARN BILL THICKNESS option.
D ESCRIPTION :
The first time the dispenser is set up, or if a new Note Cassette is
installed, the mechanism will automatically enter a learning mode,
during which it will learn the thickness of the currency or other
media. During this process the unit will dispense and reject as many
as 7-15 notes. For multiple cassettes the number of test rejects
could almost fill the single-note compartment of the Reject Cas-
sette. In such cases, it is recommended that you remove any re-
jected notes from the unit before placing the Cash Dispenser back
into service.
It some instances (excessive number of rejects during normal op-
eration, for example) it may be necessary to manually initiate this
process. The RELEARN BILL THICKNESS function enables you
to force the dispenser to enter the learning mode. Note that the
operation affects ALL cassettes in the dispenser! The following
screens will be displayed as a result of a successful operation:
E RROR C ONDITIONS :
There are no errors directly associated with this function.