Triton 97XX Series Operation Manual - Manual (Page 174)

TRITON SYSTEMS, INC. 5-119
O
PERATION
M
ANUAL
- M
ODEL
97XX-Series SECTION 5 - MANAGEMENT FUNCTIONS
9700-S ERIES 9705-S ERIES 9710-S ERIES 9750-S ERIES
DIAL RATE
F ACTORY D EFAULT : ‘FAST’
A CCESS I NSTRUCTIONS :
1. Select TERMINAL CONFIGURATION from the MANAGEMENT
FUNCTIONS menu.
2. Select SET TERMINAL PARAMETERS.
3. Select TELEPHONE.
4. Select the MODEM SETUP option.
5. Select DIAL RATE.
D
ESCRIPTION
:
The internal modem can be configured to send dial tones at one of
three speeds. The possible values are FAST (70 milliseconds),
MED. (150 ms), and SLOW (255 ms). The default value from the
factory is FAST. After changing the dial rate, be certain to execute
the RESET/TEST MODEM function. The new dial rate does not
take effect until you do this.
E RROR C ONDITIONS :
There are no error conditions directly associated with this function,
but if calls seem to fail, try a slower setting.