Work Sharp Sharpening System - Manual (Page 16)

Before we do that, let’s start with an old
beat up construction chisel that has not
been sharpened with Work Sharp be-
fore. It has been badly abused by dig-
ging out nails, whacking knots, being
used as a crow bar, and all those other
necessary tasks that I’m sure none of
you ever do (grin)!
The highly mag-
nified cutting
bevel and cut-
ting edge images show just
how bad this chisel was be-
fore it was sharpened. The
edge is nicked all across
and the bevel and back are
both rusted and pitted. A
really ugly chisel!