Catskill Craftsmen 1429 - Manual (Page 10)

STEP 5
Drawer Assembly
1 Lower Drawer Front, 1 Upper Drawer Front, 1 Upper Left Drawer Side, 1 Upper Right Drawer Side,
1 Lower Left Drawer Side, 1 Lower Right Drawer Side, 1 Lower Drawer Back, 1 Upper Drawer Back,
2 Drawer Bottoms, 4 Handles, 8 Machine Screws
1. Attach Drawer Back to Drawer Sides using 1-1/4” Phillips Flat Head #8 screws.
2. Then insert Drawer Bottom into slots.
3. Put bastion posts into Drawer Front & secure to Drawer Sides using barrel nuts & set
screws.
4. Attach handles using 3/4” panhead machine screws use washers if needed.
5. Attach the Glide inserts to the drawer sides using 5/8” Phillips Pan Head #6 Screws.
ILLUSTRATION 5
UPPER DRAWER
LOWER DRAWER