Catskill Craftsmen 1429 - Manual (Page 7)

STEP 2
Front Assembly
1 Front Right/Back left Leg, 1 Front Left/Back Right Leg, 2 Mid/Top Front Brace
1. Tap 3/4” pins into the ends of all the braces. The pin goes into the smaller of the two holes.
2. Lay the legs on a flat smooth surface so that the holes are oriented as shown in illustration 2. Put
bastion posts in the first and fifth holes from the top of the legs. The holes in the bastion posts should
be oriented as shown in Illustration 2.
3. Attach both the Mid/Top Front Braces to one of the legs using barrel nuts and set screws.
4. Attach the other Leg to the braces using barrel nuts and set screws.
BASTION POST BASTION POST
PIN PIN
PIN PIN
BASTION POST BASTION POST
ILLUSTRATION 2