Catskill Craftsmen 1429 - Manual (Page 12)

STEP 7
1 Main Assembly, 1 Assembled Upper Drawer, 1 Assembled Lower Drawer, 1 Assembled Top,
1 Middle Shelf
1. Now tap in 1” pins into the middle braces with a hammer and fit the middle shelf on the top of the
pins.
2. Fit the Top into place then secure it to legs using 5/8” #6 screws through the “L” Brackets. (Note:
top drawer must be removed to allow for attaching “L” brackets)
3. Attach the drawers to the cart by sliding them into the Glide Rails.
Finishing Touches
ILLUSTRATION 7
Note: It may be necessary to remove the cutting board rails & slats
to fully tighten the L-Bracket screws