Catskill Craftsmen 1429 - Manual (Page 8)

STEP 3
Main Assembly
1 Assembled Back, 1 Assembled Front, 2 Top Side Braces, 4 Mid/Bot Side Braces, 4 Drawer Glide
Supports, 2 Side Panel Inserts
1. Lay Assembled Back Unit on its back and put bastion posts in the centered holes first, fourth, and
fifth from the top of the legs as shown in illustration 3.
2. Pound 3/4” pins into the ends of all the braces and Drawer Glide Supports.
3. Attach the Top Side Braces and the Middle & Bottom Side Braces to the legs using barrel nuts and
set screws. Then slide the side panel inserts between the Middle & Bottom Side Braces.
4. Now fit the Drawer Glide Supports into place with the 3/4” pins making sure that the holes on the
support are on the bottom edge.
ILLUSTRATION 3