Step 6 – Catskill Craftsmen 1429 User Manual
Page 11
Advertising
STEP 6
Top Assembly
1 Table Top, 4 Cutting Board Slats, 4 Cutting Board Rails
1. Lay the Table Top upside-down on a smooth flat surface and attach the Cutting Board
Rails & Slats as shown in illustration 8 using 1 3/4” #8 screws.
2. Attach the Cutting Board Stoppers to the center holes on the Table Top using 1 1/4” #8
screws.
3. Then attach the “L” brackets to the Top using 5/8” #6 screws. Attach “L” Brackets to the
table top using the round hold, not the slots.
ILLUSTRATION 6
1 1/4” Screw
1 3/4” Screw
Advertising