Catskill Craftsmen 1582 - Manual (Page 12)

STEP 9
A. Install Door by placing a washer onto
the pin on the bottom of the door, then
sliding the pin into the hole in the bottom
Front Brace.
B. Fit the top Front Brace onto the pin on
the top of the door and secure the brace
using 1 3/4” machine screws and nuts as
in illustration 9A.
C. Tap 1” pins into left Side Panel as in
illustration 9B. These will hold the shelves.
ILLUSTRATION 9A
ILLUSTRATION 9B
2 Used
in this step
1 3/4” Phillips Flat Head Bolt 10-24 Hex Nut
2 Used
in this step
4 Used
in this step
1” Long 3/16” DIA. Steel Pin