Catskill Craftsmen 1582 - Manual (Page 4)

STEP 1A
IMPORTANT - There is a right and a left side panel. Lay them out as shown below in Illustration 1. Pay close attention
to the glides, that they are properly positioned when attaching to the side panels. See step 1B for specific instructions
on the full extention glides. Duplicate the assembly process for the Glide Supports, top Glides and L brackets on each
side panel. Note the proper direction of the glides.
ILLUSTRATION 1A
TOP TOP
5/8” #7 Screw
1 1/4” #8 Screw
5/8” #6 Screw
8 Used
in this step
1-1/4” Phillips Flat Head #8 Screw
8 Used
in this step
5/8” Phillips Flat Head #7 Screw
3/8” #6 Pan Head
Screw
9 Used
in this step
3/8” Phillips Pan Head #6 Screw
Left Side Panel
Right Side Panel
4 Used
in this step
5/8” Phillips Flat Head #6 Screw
Glide Support
Top Drawer Glide
“L” bracket