GW Instek GDS-2000A series User Manual - Manual (Page 125)

CONFIGURATION
125
Set the Level of Persistence
Background The persistence function allows the GDS-2000A to
mimic the trace of a traditional analog oscilloscope.
A waveform trace can be configured to “persist”
for designated amount of time.
Panel Operation 1. Press the Display menu key.
Display
2. To set the persistence time, press
the Persistence menu button on the
bottom bezel.
3. Use the Variable knob to select a
persistence time.
Time 16ms~10s, Infinite, Off
Clear To clear persistence, press Clear
Persistence.
Set the Intensity Level
Background The intensity level of a signal can also be set to
mimic the intensity of an analog oscilloscope by
setting the digital intensity level.
Panel Operation 1. Press the Display menu key.
Display
2. Press Intensity from the bottom
menu.
Waveform
Intensity 3. To set the waveform intensity, press Waveform
Intensity and edit the intensity.