GW Instek GDS-2000A series User Manual - Manual (Page 198)

GDS-2000A Series User Manual
198
Save Waveform
Panel Operation 1. To save to an external USB
flash drive, connect the
drive to the front or rear
panel USB port. If a USB
drive is not connected, files
will be saved to the internal
memory.
Front Rear
Host
Note
Only one host connection, front or rear, is allowed at a
time.
The USB Device port on the rear panel cannot be used
concurrently with the USB Host port on the rear panel.
2. Press the Save/Recall key from the
front panel.
Save/Recall
3. Press Save Waveform from the
bottom menu.
4. Choose the From waveform on the
side menu.
Source CH1~4, Math, Ref1~4,
D0~D15*, All Displayed
* digital channels only
5. Press To (internal memory) or To
File and choose a destination to
save.
To Ref1~4, Wave1~20
To File Format: LSF, Detail CSV, Fast
CSV, LM Detail CSV, LM Fast CSV