GW Instek GDS-2000A series User Manual - Manual (Page 167)

CONFIGURATION
167
Clear All Marks To clear all the saved marks, press
Clear All Marks from the side
menu.
Note
Each time the Save All Marks function is used, the
previously saved marks will also be retained,
unless cleared.
Setting/Clearing Single Search Events
Background In addition to searching for search events based on
Search Type settings, custom search marks can be
created with the Set/Clear key.
Set Search Event 1. Navigate to a point of interest using
the horizontal position knob or
some other method.
POSITION
2. Press the Set/Clear key.
Set/Clear
3. A marker will be saved at the center
of the display.
 This marker can be navigated
to/from in the same way that a
normally saved search marker
can.
Clear Search Event To clear a set search event, use the
search arrows to navigate to the
event of interest and press the
Set/Clear key.
The marker will be deleted from the
display.
Set/Clear