GW Instek GDS-2000A series User Manual - Manual (Page 130)

GDS-2000A Series User Manual
130
Horizontal View
This section describes how to set the horizontal scale, position, and
waveform display mode.
Move Waveform Position Horizontally
Panel Operation The horizontal position knob moves
the waveform left/right.
POSITION
As the waveform moves, a position indicator on
the on the top of the display indicates the
horizontal position of the waveform in memory.
Reset Horizontal
Position 1. To reset the horizontal position,
press the Acquire key and then
press Reset H Position to 0s from the
bottom menu.
Acquire
Run Mode In Run mode, the memory bar keeps its relative
position in the memory since the entire memory is
continuously captured and updated.