GW Instek GDS-2000A series User Manual - Manual (Page 61)

QUICK REFERENCE
61
Default Settings
The default factory installed settings can be
recalled at any time by pressing the Default key.
Default
Acquire Mode: Sample XY: OFF
Interpolation: Sin(x)/x Sample rate: 2GSPS
Record Length: Auto
Display Mode: Vector Persistence: 240ms
Waveform intensity: 50% Graticule intensity: 50%
Waveform visuals: Gray Graticule: full
Channel Scale: 100mV/Div CH1: On
Coupling: DC Impedance: 1MΩ
Invert: Off Bandwidth: full
Expand: By ground Position: 0.00V
Probe: voltage Probe attenuation: 1x
Deskew: 0s
Cursor Horizontal cursor: Off Vertical Cursor: Off
Measure Source: CH1 Gating: Screen
Display: Off High-Low: Auto
Statistics: Off Mean & Std Dev
Samples: 2
Horizontal Scale: 10us/Div Position: 0.000s
Math Source1: CH1 Operator: +
Source2: CH2 Position: 0.00 Div
Unit/Div: 200mV Math Off
Test App: Go-NoGo
Trigger Type: Edge Source: CH1