GW Instek AFG-100/200 Series User Manual - Manual (Page 10)

AFG-125/225 Series Options Manual
10
Main Features
Performance  DDS signal generator
 1μHz resolution over the full range
 20ppm frequency stability
 Arbitrary Waveform Capability
120 MSa/s sample rate
60 MSa/s repetition rate
4 k-point waveform length
4k waveform memory, 10 groups
User-defined output
DWR (Direct waveform reconstruction) capability
PC waveform editing
Features  Sine, Square, Ramp, Pulse & Noise as standard
waveforms
 Internal LIN/LOG sweeps with marker output
 AM, FM, FSK, SUM modulation
 Triggered burst function
 Save/recall 10 setup memories
 Output overload protection
Interface  USB interface as standard
 AWES (arbitrary waveform editing software) PC
software
Power Supply
(AFG-125P/
225P only  2.5V/3.3V/5V supply output
 0.6A current output