GW Instek LCR-8000G Series - Manual (Page 51)

GRAPH MODE
101 101 101 101
Speed / Step Setting
Select measurement speed (capture timing)
Background The speed is the same setting used in the basic
measurement (page56), except in the graph mode,
maximum speed setting is not available.
Panel operation 1. Press the Up/Down key and move
the cursor to Speed.
Speed: Fast
2. If necessary, press the Left/Right
key to change the setting (time per
capture).
DC
AC≤
100Hz AC≤
2kHz AC>
2kHz AC≥
1MHz
Slow 900ms 1.3s 600ms 600ms 620ms
Med 120ms 1.2s 470ms 450ms 470ms
Fast 60ms 650ms 180ms 150ms 150ms
LCR-8000G Series User Manual
102 102 102 102
Select step size
Background The step size selects whether to plot every
captured data (step size 1) or to plot only the
selected data (step size 2, 4, 8 = every 2, 4, 8 data).
Step size 1: detailed graph, slow capturing
Step size 2, 4, 8: simplified graph, fast capturing
Panel operation 1. Press the Up/Down key and move
the cursor to Step size.
Step Size: 2 4 8 1
2. If necessary, press the Left/Right
key to change the setting.
Range 1 (plot all data), 2, 4, 8