GW Instek LCR-8000G Series - Manual (Page 52)

GRAPH MODE
103 103 103 103
Running Graph Measurement
Run measurement
Panel operation 1. When the configuration is
completed, press F4 (Start) to start
the graph measurement.
F 4
2. The display changes into graph mode and starts
plotting the measurement data.
CAPACITANCE VS FREQUENCY
ABORT
20.0 40.0 60.0 80.0 100
(Hz)
300.0n
250.0n
(F)
MKR: 40.000 Hz
Cs : 247.04nF LEVEL: 10.0mV
SPEED:FAST
*7
Measurement Ongoing
Latest Measurement
Data (Updated)
Drive Level (or Frequency)
and Speed
3. To abort the measurement, press F6
(Abort).
F 6
4. When completed, the buzzer sounds once and
the display shows the whole plotted data.
LCR-8000G Series User Manual
104 104 104 104
CAPACITANCE VS FREQUENCY
FUNCTION
RETURN
F 1
F 6
20.0 40.0 60.0 80.0 100
(Hz)
300.0n
250.0n
(F)
MKR: 32.000 Hz
Cs : 250.00nF LEVEL: 10.0mV
SPEED:FAST
Marker position and
Measurement data
Marker
5. To go back to the configuration
mode, press F6 (Return).
F 6