GW Instek GPI-700A Series Programming Manual - Manual (Page 10)

GPI/GPT SERIES PROGRAMMABLE EST
PROGRAMMER MANUAL
⎯ 17 ⎯
:GBONd:CURRent <NR2> Set the GB test current
:GBONd:CURRent? Query the GB test current
:GBONd:RMINimum <NR2> Set the GB test minimum resistance
:GBONd:RMINimum? Query the GB test resistance
:GBONd:RMAXimum <NR2> Set the GB test minimum resistance
:GBONd:RMAXimum? Query the GB test resistance
:GBONd:TTIMe <NR2> Set the GB test time
:GBONd:TTIMe? Query the GB test time
:CONTinuity:RMINimum <NR2> Set the CONT test minimum resistance
:CONTinuity:RMINimum? Query the CONT test resistance
:CONTinuity:RMAXimum <NR2> Set the CONT test minimum resistance
:CONTinuity:RMAXimum? Query the CONT test resistance
:CONTinuity:TTIMe <NR2> Set the CONT test time
:CONTinuity:TTIMe? Query the CONT test time
z Status Commands
Table 3 lists the status commands that set and query the various
registers and queues that make up the status and event structure of the
programmable power supply.
Table 3: Status Commands
*CLS Clears the status data structures.
*ESE <NR1> Sets the Event Status Enable Register
(ESER).
*ESE? Returns contents of Event Status
Enable Register (ESER).
GPI/GPT SERIES PROGRAMMABLE EST
PROGRAMMER MANUAL
⎯ 18 ⎯
*ESR? Returns and clear the contents of
Standard Event Status Register
(SESR).
*SRE <NR1> Sets contents of Service Request
Enable Register(SRER).
*SRE? Returns contents of Service
Request Enable Register (SRER).
*STB? Reads Status Byte Register
(SBR).
:STATus:OPERation:CONDition ? Returns the contents of the
OPERation condition register.
Returns NR1.
:STATus:OPERation:ENABle
<NR1> Sets the contents of the enable mask
for the OPERation event register.
:STATus:OPERation:ENABle ? Returns the contents of the enable
mask for the OPERation event
register. Returns NR1.
:STATus:OPERation:EVENt ? Query the contents of the OPERation
Event register.
:STATus:PRESet Presets the OPERation and
QUEStionable status registers.
:STATus:QUEStionable:
CONDition ?
Returns the contents of the
OPERation condition register.
Returns NR1.
:STATus:QUEStionable:ENABle
<NR1> Sets the contents of the enable mask
for the QUEStionable enable register.
:STATus:QUEStionable:ENABle? Query the contents of the
Questionable Enable register.