GW Instek GDM-8261 User Manual - Manual (Page 193)

REMOTE CONTROL
193
CALCulate:AVERage:MINimum?
Returns the minimum recorded value.
Parameter: None | <NR1>(0~2) 0=Store, 1=Scan, 2=Stats
CALCulate:AVERage:MAXimum?
Returns the maximum recorded value.
Parameter: None | <NR1>(0~2) 0=Store, 1=Scan, 2=Stats
CALCulate:AVERage:AVERage?
Returns the average recorded value.
Parameter: None | <NR1> (0~2) 0=Store, 1=Scan, 2=Stats
CALCulate:AVERage:PTPeak?
Returns the recorded peak to peak value (max value – min value).
Parameter: None | <NR1> (0|1|2) 0=Store, 1=Scan, 2=Stats
Return Parameter: <NRf>
CALCulate:AVERage:SDEViation?
Returns the recorded Standard Deviation.
Parameter: None | <NR1> (0~2) 0=Store, 1=Scan, 2=Stats
CALCulate:MATH:MMFactor
Sets the scale factor M for math measurements.
Para meter: <NRf> | MIN | MAX
Example: CALC:MATH:MMF MIN
Sets the scale factor M to the minimum allowed value.
CALCulate:MATH:MMFactor?
Returns the scale factor M used in the math measurement.
CALCulate:MATH:MBFactor
Sets the offset factor B for math measurements.
Para meter: <NRf> | MIN | MAX
Example: CALC:MATH:MBF MIN
Sets the offset factor B to the minimum allowed value.
CALCulate:MATH:MBFactor?
Returns the offset factor B used in the math measurement.
CALCulate:MATH:PERCent
Sets the reference value for the Percent function.
Para meter: <NRf> | MIN | MAX
Example: CALC:MATH:PERC MAX
Sets the reference value for the Percent function to the maximum.
CALCulate:MATH:PERCent?
Returns the reference value setting for the Percent function.