HT instruments HT9022 - Manual (Page 27)

HT9022
EN - 25
5.4.2. AC+DC current and Current Harmonics measurement
Fig. 10: AC+DC current measurement
WARNING
Insert the cable in the middle of the clamp jaws, in order to obtain accurate
measures.
Use the marks as a reference (see Fig. 2).
5.4.2.1. Key F2 “Par”
Press key F2 (Par) to open the drop-down menu shown on the
screen to the side. At each subsequent pressure of key F2, the
cursor will scroll through the available items, as follows:
• Current: it shows the measured current value;
• Current Har: it shows the measured Current harmonics;
• Esc: it closes the drop-down menu.
Select the desired parameter and press key F4 (OK) to confirm.
Mod Par OK
A C 5 0 . 0 H z
1 0 0 . 0 A
19/01-17:00:00
5.4.2.2. AC+DC current
The screen shows an example of AC+DC current measurement.
Mod Par Fnz
A C 5 0 . 0 H z
1 0 0 . 0 A
19/01-17:00:00
Current
Current Har
Esc