HT instruments SOLAR300N - Manual (Page 103)

SOLAR300 - SOLAR300N
EN - 101
5.7.1.5. Inrush currents
This page shows a table containing all of the Inrush current occurred while recording
Fig. 164: Inrush currents
Description of the columns:
N.: Progressive number of inrush current.
L.: Phase in which inrush current has occurred.
Time: Date/time in which the inrush current occurred.
Max[A]: Maximum value reached by the inrush current.
Within this page, the following keys are active:
 The up and down arrow keys move the cursor along the list of events
 The right and left arrow keys move the column display to the right or to the left
 The
F1 key (or the PAG item on the display) moves to the following pages of Inrush
Currents (to be selected with the F3 or F4 key or with the MOD (+) or MOD (-) items on
the display)
 The
F2 key (or the PARAM item on the display) accesses the page which shows the
settings made for the Inrush Currents (see Fig. 165)
 The
F3 key (or the GRAPH item on the display) accesses the page which shows the
graph of the selected Inrush Current (see Fig. 166)
 The
ESC key (or the smart icon ) exits the function and goes back to the “Recording
Analysis” page (see Fig. 154)
This page shows the parameters set for Inrush Currents before recording:
Fig. 165: Inrush currents parameters