HT instruments SOLAR300N - Manual (Page 97)

SOLAR300 - SOLAR300N
EN - 95
The following operations are possible only on the screen in Fig. 153:
1. Use the up and down arrow keys to highlight (blue background) one of the recordings
on the screen. Press the F1 key (or the INFO item on the display). The instrument
shows the screen containing the main information regarding the recording performed
as described in § 5.7.1.
2. Press the F3 key (or the DEL item on the display) to delete the last saved recording.
The instrument shows the message “Delete last recording?”. Confirm the operation
with “Ok” or “Cancel” to go back to the screen.
3. Press the F4 key (or the DEL ALL item on the display) to delete all recordings in the
memory. The instrument shows the message “Delete all recordings?”. Confirm the
operation with “Ok” or “Cancel” to go back to the previous screen.
5.7.1. Recording analysis (Reg type)
This page shows the analyses which can be performed on the saved data (Reg type).
Fig. 154: Recording analysis (Reg-type data)
1. Use the up and down arrow keys to highlight on blue background one of the analyses
on the screen. Press the F1 or ENTER key (or the OPEN item or the smart icon on
the display) to confirm the type of analysis to be performed.
2. Press the ESC key (or the smart icon ) to exit the function and go back to the “Saved
data” page (Fig. 153).
5.7.1.1. Recording information
This page contains general information about the recording (Reg) file previously selected
in the Saved Data Management MENU.
Fig. 155: Recording info
1. In these conditions, the F1 key (or the MODIFY key on the display) is active and it is
possible to modify and save the comment line by using the virtual keyboard (see §
5.4.2.2).
2. Press the ESC key (or the smart icon ) to exit the function and go back to the
“Recording analysis” page (Fig. 154).