HT instruments SOLAR300N - Manual (Page 56)

SOLAR300 - SOLAR300N
EN - 54
5.4. RECORDING SETTINGS
12/09/2006 – 16:55:10
GENERAL MENU
Recording settings
Fig. 104: Recording Settings screen selection
In this section the meter permits to define any detail relative to start and stop of recordings,
perform parameters selection for recording, the type of analysis to be carried out very
easily thanks to “touch screen” display. The use of smart icons and
is particularly
recommended in this section.
5.4.1. Recorder setting screen – PV systems
This screen is thought on different levels and sub-levels with a tree structure just like that
of the Windows function My Computer, so that the desired options are reached in a very
detailed way. After selecting icon “Recording configuration” of Fig. 104 , the instrument
shows the following screen:
Fig. 105: Example of Recording screen for Photovoltaic systems setting
By using the up and down arrow keys, or directly from the display, it is possible to highlight
the different internal items and to select/deselect the flags inside the check boxes. Next to
the check boxes with the “+” symbol, the group expands, opening a sub-level where it is
possible to carry out new selections. By pressing on the check box with the “-” symbol, you
go back to the upper level. Selection/deselection is visually indicated on the display, as a
help to the user, in the following way:
 Grey text and empty check box  Completely deselected group
 Black text and empty check box  Partially selected group
 Black text and selected check box  Completely selected group
From the display, it is also possible to use the scroll bar located fully on the right. The bar
at the bottom of the display includes the following functions, which correspond to keys F1,
F2, F3, F4: