HT instruments SOLAR300N User Manual
Page 79
SOLAR300 - SOLAR300N
EN - 77
12/09/2006 – 16:55:10
PREDEFINED CONFIGURATIONS
Typical Configuration
DEFAULT
VOLTAGE ANOMALIES
HARMONICS
POWER & ENERGY
GENERIC PLANT
ADD
RAM
Fig. 137: Typical customized configuration screen
The typical customized configuration called e.g. “GENERIC PLANT” was defined and can
be loaded by pressing the SAVE or ENTER keys (or the smart icon
). This configuration
cab be removed in any time by pressing F2 key (or the REM at display). The warning
message “Delete selected configuration?” is shown by meter. Press “Ok” to complete
the operation. Please note that the 5 predefined configuration and the DEFAULT
configuration cannot be removable by user.
Press ESC (or the smart icon ) to quit without saving any modify. Below the selected
parameters for each of predefined configuration are shown: