HT instruments VEGA78 User Manual
Page 102
VEGA78
EN - 100
In this page, the following symbols are used:
V12
Phase L1 - Phase L2 Voltage
V23
Phase L2 - Phase L3 Voltage
V31
Phase L3 - Phase L1 Voltage
Inv%
% value of the Negative sequence unbalance
Omo%
% value of the Zero sequence unbalance
SEQ Phase
sequence:
”123” => Correct
”132” => Not correct
”023” => No Voltage on B1
”103” => No Voltage on B2
”120” => No Voltage on B3
”100” => No Voltage on B2 and B3
”020” => No Voltage on B1 and B3
”003” => No Voltage on B1 and B2
Hz
Frequency
I1
Current on Phase L1
I2
Current on Phase L2
I3
Current on Phase L3
Fig. 170: Page 1/4 of numeric values for Aron system
The following keys are active on this page:
The
F1 key (or the PAG item on the display) advances to the following page.
The ESC key (or the smart icon on the display) to exit the function and go back to the
“Recording analysis” page (Fig. 124).
In this page, the following symbols are used:
Patt
System total Active Power
Preatt
Total Reactive Power
Papp
Total Apparent Power
Pf
Total Power Factor
CosPhi
System total CosPhi
CosPhi represents the theoretical limit value which
can be reached by the Power factor if all harmonics
are eliminated from the electrical system. For
dimensioning a power factor correction system,
reference is usually made to the CosPhi parameter
value.
Fig. 171: Page 2/4 of numeric values for Aron system
The following keys are active on this page:
The
F1 key (or the PAG item on the display) advances to the following page.
The ESC key (or the smart icon on the display) to exit the function and go back to the
“Recording analysis” page (Fig. 124).
In this page, the following symbols are used:
V12
Phase L1 - Phase L2 Voltage
I1
Phase L1 Current
Patt12
Wattmeter 12 Active Power
Preatt12
Varmeter 12 Reactive Power
Papp12
Varmeter 12 Apparent Power
Pf12
Wattmeter 12 Power Factor
CosPhi12
Cosine of the Phase delay between the
Wattmeter 12 Voltage and Current fundamentals
Fig. 172: Page 3/4 of numeric values for Aron system