HT instruments VEGA78 - Manual (Page 60)

VEGA78
EN - 58
5.4.10. Start a recording
The meter is designed to start a recording in MANUAL or AUTOMATIC mode (see § 5.4.3)
by pressing of GO/STOP key. A recording operation can be started exclusively under the
following screens:
 MENU GENERAL (with any selected icon).
 Real Time Values (in any internal screen).
12/09/2006 – 16:55:10
GENERAL MENU
Meter information
12/09/2006 – 16:55:10
SCOPE VOLTAGES – Page 1/5
Fs 400.0V
V1 223.4V
V2 228.5V
V3 225.7V
Vn 0.0V
PAGE
Fig. 103: Example of screens for recording starting
Before starting a recording press ESC key (or the smart icon ) until you get a picture as
shown in Fig. 103.This operation can be performed in the below ways:
 MANUAL: Recording will start at the following minute after pressing GO/STOP key.
 AUTO:
After the (necessary) pressing of GO/STOP key the meter stands-by
until the set Date/Hour (see § 5.4.3) and then start automatically the
recording.
The waiting and recording run status are marked by meter with dedicated icons which are
present on the top right of display, as shown in below picture:
Fig. 104: Meter waiting for recording
12/09/2006 – 16:55:10
GENERAL MENU
Meter information
12/09/2006 – 16:55:10
GENERAL MENU
Meter information
Fig. 105: Meter in recording run
Press again GO/STOP key to stop the recording run in any time. The icon shown in Fig.
105 disappear.