HT instruments VEGA78 - Manual (Page 16)

VEGA78
EN - 14
3. With Password enabled, should GO/STOP key be pressed during a recording, the
meter will not stop the operation but will require the user to insert password as shown
in the below screen:
12/09/2006 – 16:55:10
GENERAL MENU
_
_
_
_
_
_
_
_
_
_
Warning
Insert Password
* * * *
__ _ _ __ ___ _
General settings
Fig. 13: Insert Password screen
4. The fixed password (not changeable by user) to insert on meter within 10s from
warning message is the below sequence of keys:
F1, F4, F3, F2
5. If a wrong password is fitted or if more of 10s elapse, the meter will give the warning
message “Wrong Password” and it’s necessary to repeat the operation. As soon as the
correct password is fitted, the meter will stop immediately the recording running and the
correspondent icon at display (see Fig. 13) will disappear.
6. Press SAVE or ENTER keys (or the smart icon ) to save the selected option and
confirm by “Ok”. This selected parameter will be present also after turning off the meter.
7. Pressing ESC key (or the smart icon ) to quit without saving any modification.
5.1.5. Sound keys setting
The meter permits to enable a instantaneous sound for any key pressure of the frontal
panel.
1. Move the cursor using arrows keys on field relative to “Sound”, marked with blue
background, see Fig. 14:
12/09/2006 – 16:55:10
GENERAL SETTINGS
Language ENGLISH
Brightness 75%
Password NO
Sound SI
Auto power off SI
Memory type INTERNAL
DATE MOD(+) MOD(-)
Fig. 14: Keys sound settings screen