INOR MINIPAQ-HLP GB User Manual

Page 2

Advertising
background image

CALIBRATION

CONNECTIONS

OUTPUT LOAD DIAGRAM

It is recommended to check the calibration once a year. Use equipment

with an inaccuracy of at least 5 times better than the checked transmitter,

e.g. if you are checking a transmitter with an inaccuracy of maximum

0.1% use instrument with an inaccuracy of maximum 0.02%.

Use the MinIPAQ Soft Basic Calibration function in the Options menu, and

follow the instructions on the screen.

INPUT CONNECTIONS

DIMENSIONS

MOUNTING

RTD, 3-wire connection

Pt100, α =0.00385, Pt1000, α=0.00385

Pt100, α =0.003902, Pt100, α=0.003916

Ni100, Ni120, Cu10, Ni1000,

Pt(Spec), α=0.00385

Thermocouple

B, C, E, J, K, L, N, R, S, T, U

RTD

,

4-wire connection

Pt100, α=0.00385, Pt1000, α=0.00385

Pt100, α=0.003902, Pt100, α=0.003916

Ni100, Ni120, Cu10, Ni1000

Pt(Spec), α=0.00385

Head

mounting

kit

20 mm/

9.75 turns

18.5/0.72

44.5/1.75

ORDERING INFORMATION

LIMITED WARRANTY

INOR Process AB, or any other affiliated company within the Inor Group (hereinafter

jointly referred to as ”Inor”), hereby warrants that the Product will be free from defects

in materials or workmanship for a period of five (5) years from the date of delivery

(”Limited Warranty”). This Limited Warranty is limited to repair or replacement at

Inor’s option and is effective only for the first end-user of the Product. Upon receipt

of a warranty claim, Inor shall respond within a reasonable time period as to its

decision concerning:

1 Whether Inor acknowledges its responsibility for any asserted defect in

materials or workmanship; and, if so,

2 the appropriate cause of action to be taken (i.e. whether a defective

product should be replaced or repaired by Inor).

This Limited Warranty applies only if the Product:

1 is installed according to the instructions furnished by Inor;

2 is connected to a proper power supply;

3 is not misused or abused; and

4 there is no evidence of tampering, mishandling, neglect, accidental damage,

modification or repair without the approval of Inor or damage done to

the Product by anyone other than Inor.

This Limited Warranty is provided by Inor and contains the only express war-

ranty provided.

INOR SPECIFICALLY DISCLAIMS ANY EXPRESS WARRANTY NOT

PROVIDED HEREIN AND ANY IMPLIED WARRANTY, GUARANTEE

OR REPRESENTATION AS TO SUITABILITY FOR ANY PARTICULAR

PURPOSE, PERFORMANCE, QUALITY AND ABSENCE OF ANY HIDDEN

DEFECTS, AND ANY REMEDY FOR BREACH OF CONTRACT, WHICH BUT

FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION, OPERATION

OF LAW, CUSTOM OF TRADE OR COURSE OF DEALING, INCLUDING

IMPLIED WARRANTIES OF MER-CHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. EXCEPT AS PROVIDED HEREIN,

INOR FURTHER DISCLAIMS ANY RESPONSIBILITY FOR LOSSES,

EXPENSES, INCONVENIENCES, SPECIAL, DIRECT, SECONDARY OR

CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE

OF THE PRODUCT.
Products that are covered by the Limited Warranty will either be repaired or replaced

at the option of Inor. Customer pays freight to Inor, and Inor will pay the return

freight by post or other “normal” way of transport. If any other type of return freight

is requested, customer pays the whole return cost.

MinIPAQ-HLP

70MQHLP002

Configuration

70CAL00001

ICON Configuration Kit (non-Ex)

70CFGUS001

Head mounting kit

70ADA00017

DIN-rail Adapter

70ADA00015

53/2.08

10/0.39

DIN-rail

Adapter

mm/inches

Advertising