In-Situ Rugged TROLL 100/200 Operators Manual - Manual (Page 13)

800-446-7488 13 www.in-situ.com
An internal 9 volt battery powers the Rugged TROLL Com, but it does not provide
power to the instrument. The Rugged TROLL Com connects to the uphole end of the
Rugged TROLL 200 cable. Once connected, you can program the instrument, view
real-time readings, and download the data.
Do not submerge the Rugged TROLL Com Device.
Rugged TROLL Com Battery Installation
1. Open the battery compartment door.
2. Attach the battery leads to the battery terminals.
3. Push the battery into the compartment.
4. Close the battery compartment door.
Connections
1. Attach the Rugged TROLL Com to the Rugged TROLL 200 cable via snap-on
connection to the uphole end of the cable.
2. Connect the communication cable to the PC or RuggedReader Handheld PC.