In-Situ Aqua TROLL 400 Operators Manual - Manual (Page 3)

800-446-1500 3 www.in-situ.com
Table of Contents
1 Introduction 5
Scope 5
Serial Number Location 5
2 Safety 5
Electrical Safety 5
3 General Specifications 6
4 Sensor Specifications 7
Level, Depth, Pressure Sensor Specifications 7
Conductivity Sensor Specifications 7
Dissolved Oxygen RDO Classic (Optical Sensor) Specifications 8
ORP Sensor Specifications 8
pH Sensor Specifications 9
Sample Temperature Sensor Specifications (Probe) 9
5 Instrument Overview 10
Instrument Description 10
6 System Components 10
Probe Dimensions with Restrictor On 11
Probe Dimensions with Restrictor Off 11
Sensors 12
Cable 12
Win-Situ 5 Software 12
7 Probe Setup 13
Installing the Sensors 14
8 Communication Settings and Calibration 16
Connect the Instrument to the Computer 16
Connect the Instrument to Win-Situ 5 Software 16
First Screen (Data Tab) 17
Set Communication Outputs 18
Modbus Setup 19
SDI-12 Setup 20
View and Record Data 21
Calibrate and Set Up Sensors 23
Set Parameter Units and Sentinel Values 24
RDO Sensor Calibration 25
Calibration 100% Oxygen Saturation 25
Calibrate 0% Oxygen Saturation 26