In-Situ smarTROLL RDO Handheld Operators Manual - Manual (Page 12)

12
System Setup
You will need to install batteries in the battery pack, install the RDO Sensor Cap on the
probe, and attach the cable.
Install the Batteries
The 4 AA batteries that are shipped with the battery pack are likely to last for 80 hours
of continuous use.
1 Power indicator
2 On/Off button
3 Belt clip
4 Battery compartment latch
5 Cable connection
1. Twist the cable connector counterclockwise to remove the cable from the battery
pack.
2. Slide the lever on the battery compartment to release the cover.
3. Install the 4 AA batteries according to the +/- indicators engraved on the outside
cover.