In-Situ smarTROLL RDO Handheld Operators Manual - Manual (Page 18)

18
Change Parameters and Units
1. From the Home screen, tap any parameter field.
2. Swipe the left side of the parameter pick wheel to find the appropriate parameter.
3. Swipe the right side of the parameter pick wheel to select the appropriate unit.
4. Tap the Set button to set the parameter and unit selection.
iSitu Sites
About Sites
A site represents the physical location at which the instrument collects data. For
example, you can create a site to represent a lake, gauging station, well, tank, number,
or nearby landmark.
If you do not set up a site, your data will be associated with Default Site. The site name
is displayed at the top of the Live Readings screen.
Tap the Sites button to select or edit an existing site, or to create a new site.