In-Situ smarTROLL RDO Handheld Operators Manual - Manual (Page 5)

5
Introduction
This manual is intended to describe the characteristics, operation, calibration, and
maintenance of the SmarTROLL™ RDO Handheld Instrument.
Scope
This manual covers the following information.
Chapter 1—Introduction
Chapter 2—Safety
Chapter 3—Overview
Chapter 4—System Components
Chapter 5—Probe Setup
Chapter 6—iSitu Overview
Chapter 7—iSitu Sites
Chapter 8—iSitu Data
Chapter 9—RDO Sensor Calibration
Chapter 10—Care and Maintenance
Serial Number Location
The probe serial number is engraved on the probe body.
The battery pack serial number is on a sticker affixed to the battery pack casing.
Safety
Do not submerge the battery pack or the mobile display device in
liquid.
Ensure that the RDO Sensor Cap is pressed firmly over the
sensor lens and is flush with the instrument before submerging in
liquid.
Replace the cable if insulation or connectors are damaged.
Make sure the probe and sensor O-rings are clean and free of
damage.