In-Situ Communication Device Kit for the Aqua TROLL 400 and RDO PRO Probe User Manual
Page 14
Advertising
![background image](/manuals/367746/14/background.png)
800-446-7488
14
www.in-situ.com
14. Once calibration is complete, remove the instrument from the calibration cup and
rinse both thoroughly with clean water.
15. Diagnostics and Factory Reset
16. The Probe Info Tab displays the software application version, probe type, and probe
serial number. This tab also allows contains access to Diagnostics and Factory
Reset options.
Advertising
This manual is related to the following products: