In-Situ Communication Device Kit for the Aqua TROLL 400 and RDO PRO Probe - Manual (Page 7)

800-446-7488 7 www.in-situ.com
RDO Sensor
Screen Element Purpose
Enable automatic salinity
correction from the conductivity
sensor (checkbox)
Select the checkbox to use the reading from the
integrated conductivity sensor. Clear the checkbox if
you want to enter a fixed PSU value, and then click
Edit.
Current value (PSU) (text field)
Displays the value that is currently used for salinity
correction.
Default (PSU)
text field
Displays the value that will be used for salinity
correction by default when you apply power to the
instrument.
Edit
(button)
Allows you to change the Default (PSU) text field.
Current value (mbar) (text field)
Displays the value that is currently used for barometric
pressure correction. Note: If your controller reads
barometric pressure, it can be read into the current
value.
Default (baro)
Displays the value that will be used for barometric
correction by default when you apply power to the
instrument.
Edit
(button)
Allows you to change the Default (mbar) text field.