In-Situ Communication Device Kit for the Aqua TROLL 400 and RDO PRO Probe - Manual (Page 3)

800-446-7488 3 www.in-situ.com
View Live Readings
When the instrument is connected to the software, a snap shot of data appears on
screen. If you want live readings to continue, click the Start button.
Screen Element Purpose
Connect/Disconnect
(button) Establishes connection and disconnection between the
instrument and the software.
Sample Rate
(text field) Allows you to enter the rate at which the instrument will
report measurements.
Save live data to file
(checkbox)
Saves data to a .csv file on your computer. Once the
checkbox is selected, click Start to begin saving data to
a location of your choice on your computer.
Start/Stop
(button)
Starts and stops data polling.
Select Parameters
(button)
Allows you to enable and disable parameters. Click the
Select Parameters button and click the checkboxes to
select or clear parameters.
Parameter Up
(button)
Allows you to move a parameter higher in the list. Click
the parameter and then click the Parameter Up button
until the desired location is reached.
Parameter Down
(button)
Allows you to move a parameter lower in the list. Click
the parameter and then click the Parameter Down
button until the desired location is reached.