In-Situ Communication Device Kit for the Aqua TROLL 400 and RDO PRO Probe - Manual (Page 5)

800-446-7488 5 www.in-situ.com
SDI-12 Setup
SDI-12 setup allows you to set the instrument address, select the parameters you
intend to log, and select the order in which the parameters will appear in the log file.
Screen Element Purpose
Address character
(text field) Allows you to assign a unique SDI-12 address to the
instrument. Use 0-9, A-Z, or a-z.
Reload from Device
(button) Restores the settings that were last written to the
instrument.
Write to Device
(button) Writes the parameters and the address to the
instrument.
Select Parameters
(button)
Allows you to enable and disable parameters. Click the
Select Parameters button and click the checkboxes to
select or clear parameters.
Parameter Up
(button)
Allows you to move a parameter higher in the list. Click
the parameter and then click the Parameter Up button
until the desired location is reached.
Parameter Down
(button)
Allows you to move a parameter lower in the list. Click
the parameter and then click the Parameter Down
button until the desired location is reached.
Cancel Returns you to the Communications tab without saving.