Jenway 4510 - Manual (Page 12)

3.2.4 TDS EC Ratio
The display will show:
The secondary display will show TDS EC and will then scroll TDS EC RATIO after 10 seconds.
Symbol will flash while adjustment is being made.
The first digit of the displayed value will be flashing. Adjustment of the flashing digit can be made
using the Up/Down arrow keys.
The Left/Right arrow keys are used to select the next adjusting digit which will flash when selected.
Once the full reading has been adjusted to the required value, press the STO key. The symbol will
disappear and the secondary display will momentarily show SAVED. The instrument display will
update and then show the Temperature Units set up menu.
3.2.5 Temperature Units selection
The display will show:
The secondary display will show UNITS and will then scroll TEMPERATURE UNITS after 10
seconds. Select the preferred temperature unit from the options available (°C or °F). The Up/Down
arrows toggle between the units.
Symbol will flash while adjustment is being made.
The Left/Right arrow keys and the CAL/CLR key have no function during this set up.
To accept the preferred temperature unit, press the STO key. The symbol will disappear and the
secondary display will momentarily show SAVED. The instrument display will update and then show
the Baud Rate set up menu.
451 050/REV A/03-03
9