Jenway 4510 - Manual (Page 4)

Section 1
Introduction
1.1 Instrument Description
A general purpose Conductivity/TDS/temperature bench meter for use in laboratory situations. The
instrument includes a 32 reading memory facility. Features include: automatic range selection,
calibration on standard solutions or direct cell constant entry, automatic temperature compensation,
analogue output and RS232 serial interface.
1.2 Instrument Specifications
451 050/REV A/03-03
1
Conductivity
Ranges
0 to 19.99µS / 0 to 199.9µS / 0 to 1999µS /
0 to 19.99mS / 0 to 199.9mS / 0 to 1999mS
Resolution 0.01µS / 0.1µS / 1µS / 0.01mS / 0.1mS / 1mS*
*only with cell constant >5
Accuracy ±0.5%±2 digits
TDS
Ranges
0 to 19.99mg/l / 0 to 199.9mg/l / 0 to 1999mg/l /
0 to 19.99g/l / 0 to 199.9g/l / 0 to 1999g/l
Resolution 0.01mg/l / 0.1mg/l / 1mg/l / 0.01g/l / 0.1g/l / 1g/l*
*only with cell constant >5
Accuracy ±0.5%±2 digits
Temperature
Range
-10 to +105°C (14 to 221°F)
Resolution 0.1°C (1°F)
Accuracy ±0.5°C (±1°F)
ATC Range 0 to 100°C (32 to 212°F)
Manual Temp. Comp. Range 0 to 100°C (32 to 212°F)
Display 3½ digit LCD
Power 9V power supply
Size 210x250x55mm
Weight 850g