KROHNE OPTISYS TUR 1050 EN - Manual (Page 10)

2
DEVICE DESCRIPTION
10
OPTISYS TUR 1050
www.krohne.com 11/2012 - 4002444301 MA OPTISYS TUR 1050 R02 en
2.2 Device description
Front view of the complete device
Figure 2-2: Description of the complete device
1 Intake tubing
2 Shut-off clamp (stops the intake flow during cuvette cleanings and replacements)
3 Drain tubing
4 Backpressure valve (allows adjustment of the amount of back pressure, which helps to control the flow rate and elim-
inate small bubbles)
5 Display (LCD)
6 Operation keys
7 Drain hose connection (inner Ø: 4.75 mm / 0.19", outer Ø: 8 mm / 0.31"), the hose has to lead to a suitable drain site
8 Drain vent hole
9 Sensor interconnect cable
10 Drain hose
11 Junction box power assembly
12 Intake hose
13 Intake hose connection (inner Ø: 4.75 mm / 0.19",outer Ø: 8 mm / 0.31"), has to supply the sensor with a dependable
sample flow
14 Pressure regulator