Document Outline

• 1 Safety instructions 5
  • 1.1 Intended use 5
  • 1.2 Safety instructions from the manufacturer 5
    • 1.2.1 Copyright and data protection 5
    • 1.2.2 Disclaimer 6
    • 1.2.3 Product liability and warranty 6
    • 1.2.4 Information concerning the documentation 6
    • 1.2.5 Warnings and symbols used 7
  • 1.3 Safety instructions for the operator 7
• 2 Device description 8
  • 2.1 Scope of delivery 8
  • 2.2 Device description 9
    • 2.2.1 pH sensor 9
  • 2.3 Nameplate 10
• 3 Installation 11
  • 3.1 Notes on installation 11
  • 3.2 Storage and transport 11
  • 3.3 Installation procedure 12
  • 3.4 Pre-installation requirements 13
  • 3.5 Electrical connection 13
    • 3.5.1 Connecting the sensor cable to the signal converter 14
    • 3.5.2 Connecting the external temperature sensor 15
    • 3.5.3 Connecting the cable to the sensor 16
  • 3.6 Calibrating the sensor 16
  • 3.7 Installing the sensor 17
    • 3.7.1 General installation instructions 17
    • 3.7.2 Mounting to a flow-through holder 18
    • 3.7.3 Mounting to SENSOFIT IMM 1000 immersion holder 19
  • 3.8 Installing an external temperature sensor 19
  • 3.9 Examples of a typical measuring point 20
• 4 Operation 21
  • 4.1 Menu mode structure 21
  • 4.2 Function tables 23
    • 4.2.1 Menu A, quick setup 23
    • 4.2.2 Menu B, test 24
    • 4.2.3 Menu C, setup 25
  • 4.3 Calibration 27
    • 4.3.1 Temperature compensation 27
    • 4.3.2 Calibrating pH measurement 31
    • 4.3.3 Calibration log 36
  • 4.4 Troubleshooting 36
• 5 Service 37
  • 5.1 Maintenance 37
    • 5.1.1 Cleaning 37
    • 5.1.2 Aging and re-calibration 37
  • 5.2 Spare parts availability 38
  • 5.3 Availability of services 38
  • 5.4 Returning the device to the manufacturer 39
    • 5.4.1 General information 39
    • 5.4.2 Form (for copying) to accompany a returned device 40
  • 5.5 Disposal 40
• 6 Technical data 41
  • 6.1 Measuring principle 41
    • 6.1.1 pH measurement 41
  • 6.2 Technical data 43
  • 6.3 Dimensions 45
• 7 Appendix 46
  • 7.1 pH as a function of mV 46
  • 7.2 pH temperature dependency 47
• Safety instructions
  • 1.1 Intended use
  • 1.2 Safety instructions from the manufacturer
    • 1.2.1 Copyright and data protection
    • 1.2.2 Disclaimer
    • 1.2.3 Product liability and warranty
    • 1.2.4 Information concerning the documentation
    • 1.2.5 Warnings and symbols used
  • 1.3 Safety instructions for the operator
• Device description
  • 2.1 Scope of delivery
  • 2.2 Device description
    • 2.2.1 pH sensor
  • 2.3 Nameplate
• Installation
  • 3.1 Notes on installation
  • 3.2 Storage and transport
  • 3.3 Installation procedure
  • 3.4 Pre-installation requirements
  • 3.5 Electrical connection
    • 3.5.1 Connecting the sensor cable to the signal converter
    • 3.5.2 Connecting the external temperature sensor
    • 3.5.3 Connecting the cable to the sensor
  • 3.6 Calibrating the sensor
  • 3.7 Installing the sensor
    • 3.7.1 General installation instructions
    • 3.7.2 Mounting to a flow-through holder
    • 3.7.3 Mounting to SENSOFIT IMM 1000 immersion holder
  • 3.8 Installing an external temperature sensor
  • 3.9 Examples of a typical measuring point
• Operation
  • 4.1 Menu mode structure
  • 4.2 Function tables
    • 4.2.1 Menu A, quick setup
      • A9, ph cal. B
      • A12, process input B ORP calibration
      • A13, process input B pH calibration
    • 4.2.2 Menu B, test
      • B1,sim.process inp.A B2,sim.process inp.B
      • B4, actual values
    • 4.2.3 Menu C, setup
      • C1, process input A C2, process input B
  • 4.3 Calibration
    • 4.3.1 Temperature compensation
    • 4.3.2 Calibrating pH measurement
    • 4.3.3 Calibration log
  • 4.4 Troubleshooting
• Service
  • 5.1 Maintenance
    • 5.1.1 Cleaning
    • 5.1.2 Aging and re-calibration
  • 5.2 Spare parts availability
  • 5.3 Availability of services
  • 5.4 Returning the device to the manufacturer
    • 5.4.1 General information
    • 5.4.2 Form (for copying) to accompany a returned device
  • 5.5 Disposal
• Technical data
  • 6.1 Measuring principle
    • 6.1.1 pH measurement
  • 6.2 Technical data
  • 6.3 Dimensions
• Appendix
  • 7.1 pH as a function of mV
  • 7.2 pH temperature dependency