KROHNE OPTIBAR DP 7060 C EN - Manual (Page 12)

2
DEVICE DESCRIPTION
12
OPTIBAR DP 7060 C
www.krohne.com 04/2014 - 4003292001 - MA OPTIBAR DP 7060 C R01 en
2.2 Device description
The setup of the device is carried out via the display and adjustment unit. For further information
refer to
Keypad functions on page 41.
A piezoresistive sensor element is used in the measuring cell.
The measuring device is supplied ready for operation. The factory settings for the process data
correspond to your order specifications.
2.2.1 Device design
The following drawings show the basic components of the differential pressure transmitter.
Figure 2-2: Basic components of single chamber differential pressure transmitter
1 Housing cover, optional with display and adjustment module below
2 Housing with electronics
3 Process assembly with measuring cell
.book Page 12 Friday, May 2, 2014 10:25 AM